Accessories Accessories

More information being continually added, please come back soon....

VISI BAG

  

It is stylish and multi-functional. One bag, many uses. The VISIBAG has high visibility panels and wide reflective strips arranged strategically to command maximum awareness of the user in all seasons and weather conditions.

Made from 600x600D heavy duty polyester the VISIBAG is robust and shower proof. It has a large top opening compartment and a front flat document pouch. Each is opened by easily gripped zips. Along each side there are sleeves designed to hold a stick/crutch holder which can be purchased separately.

The standard harness fits chairs with or without headrests also wheelchairs and rolling walkers! It has adjustable straps fitted with slide and snap fasteners.

The VISIBAG is 46cm or 18in tall - 35cm or 14in wide and 15cm or 6in depth.

£25.00 Purchased directly from us (not including postage & packaging)

SIDE BAG

More information coming soon...

STANDARD BACKPACK

Not designed to fit to a wheelchair, but could be perfect for an attendant or carer, this Hi Viz Backpack is available, customisedwith All Terrain Wheelchairs text for £35.00 including delivery (not inc VAT).  

CUP HOLDER

 

All Terrain Wheelchair's standard designed cup holders can be mounted on your armrest and fitted on the left or right side. They come standard with a 90mm internal diameter, however can be customised further to your individual needs. Alternatively, you may consider one of our RAM Mounts® cup holders. Its gimbal configuration enables the cup to remain steady and flat as you drive over bumpy surfaces. The internal diameter at the bottom is 84mm. RAM Mounts® cup holders can be fitted to the armrest or at the rear of the wheelchair for the attendant to monitor. There are some constraints to where it can be mounted, depending on specific wheelchair model specifications.  

SMART PHONE & TABLET HOLDERS

  

TRAY TABLE

More information coming soon...

ACCESSORY CHARGER / USB PLUG IN

  

Accessory Charger (1 x 12V & 2 x USB ports):  The accessory charger for 12V & USB devices, allows you to charge up to three external devices from your wheelchair.  The following sockets are available:

  • 1 x 12V device (up to 5 Amps) – the 12V device uses a standard “cigarette” style connector
  • 1 x 5V USB device (up to 1 Amp)
  • 1 x 5V USB device (up to 2.1 Amps)

Accessory Charger (2 x USB ports):  The accessory charger for USB devices, allows you to charge up to two external devices from your wheelchair via 2 x 5V USB devices (up to 2.1 Amps). Our accessory chargers can be fitted to all Magic Mobility powerchairs which use the R-Net system.  The charger is mounted on the same side as the joystick and is fitted beneath the armrest unless otherwise requested

BLUE TOOTH & I DEVICE MODULE

The R-net bluetooth modules allow wheelchair users to control a bluetooth enabled device either through a joystick or via a single input device (SID) connected to the R-net Omni. Typical applications include PC mouse control or operation of a smart device. 

Android Devices:  A list of R-Net compatible devices can be found at www.pgdt.com/smartdevices and the R-net for Android App is available from the play store; search for “PGDT”, “R-net” or “R-net for Android”. 

iDevices:  The R-net iDevice Module allows pairing with an iPad or an iPhone. Once paired, the iDevice Module uses the accessibility options switch control or voice control to allow R-net input device commands (joystick nudges) to control or access any of the applications of the iDevice

CANE / STICK HOLDER

    

All Terrain Wheelchairs can customise cane holders specifically for your wheelchair. These are totally customised to perfectly match the type of cane/crutch/stick that you use. Customised cane holders are best ordered at the time of purchasing your new wheelchair. This allows us time to ensure the configuration you’ve chosen for your wheelchair is suitable. When ordering, please specify your cane/crutch size and which side of the wheelchair you want it mounted

RAMPS

This strong aluminium ramp provides an excellent wide access solution for use in many locations. With a load rating of 272kg they provide safe loading of wheelchairs or heavy equipment such as lawn mowers and domestic appliances into vehicles.

Available directly from us.  Please enquire about price.  

WHEEL JACK

More information coming soon...

LUGGAGE RACK

  

More information coming soon...

More information being continually added, please come back soon....

VISI BAG

  

It is stylish and multi-functional. One bag, many uses. The VISIBAG has high visibility panels and wide reflective strips arranged strategically to command maximum awareness of the user in all seasons and weather conditions.

Made from 600x600D heavy duty polyester the VISIBAG is robust and shower proof. It has a large top opening compartment and a front flat document pouch. Each is opened by easily gripped zips. Along each side there are sleeves designed to hold a stick/crutch holder which can be purchased separately.

The standard harness fits chairs with or without headrests also wheelchairs and rolling walkers! It has adjustable straps fitted with slide and snap fasteners.

The VISIBAG is 46cm or 18in tall - 35cm or 14in wide and 15cm or 6in depth.

£25.00 Purchased directly from us (not including postage & packaging)

SIDE BAG

More information coming soon...

STANDARD BACKPACK

Not designed to fit to a wheelchair, but could be perfect for an attendant or carer, this Hi Viz Backpack is available, customisedwith All Terrain Wheelchairs text for £35.00 including delivery (not inc VAT).  

CUP HOLDER

 

All Terrain Wheelchair's standard designed cup holders can be mounted on your armrest and fitted on the left or right side. They come standard with a 90mm internal diameter, however can be customised further to your individual needs. Alternatively, you may consider one of our RAM Mounts® cup holders. Its gimbal configuration enables the cup to remain steady and flat as you drive over bumpy surfaces. The internal diameter at the bottom is 84mm. RAM Mounts® cup holders can be fitted to the armrest or at the rear of the wheelchair for the attendant to monitor. There are some constraints to where it can be mounted, depending on specific wheelchair model specifications.  

SMART PHONE & TABLET HOLDERS

  

TRAY TABLE

More information coming soon...

ACCESSORY CHARGER / USB PLUG IN

  

Accessory Charger (1 x 12V & 2 x USB ports):  The accessory charger for 12V & USB devices, allows you to charge up to three external devices from your wheelchair.  The following sockets are available:

  • 1 x 12V device (up to 5 Amps) – the 12V device uses a standard “cigarette” style connector
  • 1 x 5V USB device (up to 1 Amp)
  • 1 x 5V USB device (up to 2.1 Amps)

Accessory Charger (2 x USB ports):  The accessory charger for USB devices, allows you to charge up to two external devices from your wheelchair via 2 x 5V USB devices (up to 2.1 Amps). Our accessory chargers can be fitted to all Magic Mobility powerchairs which use the R-Net system.  The charger is mounted on the same side as the joystick and is fitted beneath the armrest unless otherwise requested

BLUE TOOTH & I DEVICE MODULE

The R-net bluetooth modules allow wheelchair users to control a bluetooth enabled device either through a joystick or via a single input device (SID) connected to the R-net Omni. Typical applications include PC mouse control or operation of a smart device. 

Android Devices:  A list of R-Net compatible devices can be found at www.pgdt.com/smartdevices and the R-net for Android App is available from the play store; search for “PGDT”, “R-net” or “R-net for Android”. 

iDevices:  The R-net iDevice Module allows pairing with an iPad or an iPhone. Once paired, the iDevice Module uses the accessibility options switch control or voice control to allow R-net input device commands (joystick nudges) to control or access any of the applications of the iDevice

CANE / STICK HOLDER

    

All Terrain Wheelchairs can customise cane holders specifically for your wheelchair. These are totally customised to perfectly match the type of cane/crutch/stick that you use. Customised cane holders are best ordered at the time of purchasing your new wheelchair. This allows us time to ensure the configuration you’ve chosen for your wheelchair is suitable. When ordering, please specify your cane/crutch size and which side of the wheelchair you want it mounted

RAMPS

This strong aluminium ramp provides an excellent wide access solution for use in many locations. With a load rating of 272kg they provide safe loading of wheelchairs or heavy equipment such as lawn mowers and domestic appliances into vehicles.

Available directly from us.  Please enquire about price.  

WHEEL JACK

More information coming soon...

LUGGAGE RACK

  

More information coming soon...

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page

#title#

#price#
×